Pour Over Coffee Bundle combines an adjustable-temperature
gooseneck kettle with a conical burr coffee grinder to help you prepare
fresher, more consistent coffee at home. This two-piece setup gives you
greater control over grind size, water temperature, pouring speed, and
brewing time—four important variables in manual coffee preparation.
Whether you are building a new home coffee station or upgrading from a
standard kettle and blade grinder, this bundle provides practical tools for
pour-over coffee, French press, cold brew, and other brewing methods.

Pour Over Coffee Bundle Overview
Manual coffee brewing becomes easier to repeat when you can control both
the coffee grounds and the water. This Pour Over Coffee
Bundle brings those two stages together in one coordinated
setup.
The grinder prepares freshly ground coffee using stainless steel
conical burrs. Unlike a basic blade grinder that chops beans into
irregular pieces, a burr grinder is designed to create more consistent
particles. More uniform grounds can help water pass through the coffee
bed more evenly during brewing.
The adjustable kettle then allows you to heat water to a selected
temperature and pour it through a narrow gooseneck spout. This shape
supports a slower, more controlled stream than a conventional
wide-spout kettle.
Adjustable-Temperature Pour-Over Kettle
The kettle is designed for coffee drinkers who want more control over
water temperature and pouring technique. Different coffees and brewing
recipes may perform better at different temperatures, so adjustable
heating gives you flexibility beyond a basic on-and-off kettle.
Key kettle features
- Adjustable water-temperature control
- Precise gooseneck pouring spout
- Balanced design for controlled hand pouring
- Built-in timing convenience for manual brewing
- Suitable for pour-over coffee and other hot-water preparation
- Stainless steel construction with additional functional components
The gooseneck spout helps you direct water toward the center or outer
area of the coffee bed. This makes it easier to manage the bloom,
maintain a steady pour, and avoid adding water too quickly.
Conical Burr Grinder in the Pour Over Coffee Bundle
Freshly ground coffee can provide more aroma and flavor than coffee
ground long before brewing. The conical burr grinder allows you to
prepare only the amount needed for your current recipe.
It includes 15 primary grind settings plus additional microsettings,
allowing you to move from finer grinding toward coarser settings. The
ideal setting depends on the coffee beans, roast level, brewing device,
filter, and desired extraction time.
Key grinder features
- Stainless steel conical burrs
- 15 main grind settings
- Additional microsettings for finer adjustment
- One-touch start with previous-setting memory
- 12 oz coffee bean hopper
- UV-blocking hopper tint
- Removable hopper with bean-containment trap door
- Static-reducing stainless steel grounds container
- DC motor designed to help reduce excessive heat during grinding
7 Benefits of This Pour Over Coffee Bundle
- Fresh grinding: Grind whole coffee beans close to
brewing time. - More consistent grounds: Conical burrs help create
a more uniform grind than a typical blade grinder. - Adjustable grind size: Choose settings for
pour-over coffee, French press, cold brew, and other methods. - Temperature control: Select a water temperature
suited to your coffee and recipe. - Controlled pouring: The gooseneck spout supports a
slow and directed stream of water. - Repeatable routines: Use the same grind,
temperature, coffee dose, and brew time when refining a recipe. - Coordinated setup: Two essential coffee tools are
included in one practical bundle.
How to Use the Pour Over Coffee Bundle
1. Choose your coffee
Select whole coffee beans and measure the amount needed for your
brewing recipe. A digital scale may help improve consistency, but it is
not included unless specifically stated in the package contents.
2. Select the grind setting
Begin near a medium grind for a typical pour-over brewer. Adjust finer
when water passes through too quickly or coarser when the brew takes too
long. Taste should remain the final guide.
3. Heat the water
Fill the kettle according to its operating instructions and select the
desired water temperature. Do not exceed the maximum fill line.
4. Prepare the filter and coffee bed
Place the filter in your pour-over brewer, rinse it when appropriate,
and add the freshly ground coffee. Gently level the grounds before
pouring.
5. Bloom the coffee
Add enough water to wet the grounds evenly, then allow a short bloom
period. Freshly roasted coffee may release visible gas during this
stage.
6. Continue the pour
Use the gooseneck spout to add water in a controlled pattern. Maintain
a steady flow and avoid pouring directly against the filter unless your
chosen recipe recommends it.
Brewing results depend on coffee dose, water amount, temperature, grind
size, agitation, and total contact time. For additional educational
information, visit the
Specialty Coffee Association research resources
.
Pour Over Coffee Bundle Product Details
| Component | Detail |
|---|---|
| Bundle contents | One adjustable-temperature pour-over kettle and one conical burr coffee grinder |
| Kettle model number | 8717100 |
| Grinder model number | 8717000 |
| Grinder settings | 15 main settings plus additional microsettings |
| Bean hopper capacity | 12 oz / 3/4 lb |
| Grinder dimensions | Approximately 6.8 in × 11.8 in × 14.8 in |
| Listed grinder weight | Approximately 5.6 lb |
| Grinder burr material | Stainless steel |
Coffee beans, coffee filters, pour-over dripper, scale, coffee server,
mug, and other accessories are not included unless specifically shown
in the product gallery or listed in the order contents.
Product packaging, color, included documentation, and minor design
details may vary because of manufacturer updates. Review the product
photographs and order summary before completing your purchase.
Care and Safety Instructions
Read all manufacturer instructions before using either appliance.
Follow the electrical, temperature, cleaning, and maintenance guidance
supplied with the products.
- Unplug appliances before cleaning or removing components.
- Do not immerse electrical bases, motors, plugs, or cords in water.
- Allow the kettle and hot water to cool before cleaning or handling.
- Do not operate the kettle above its stated maximum fill level.
- Clean the grinder burr area according to the manufacturer’s
instructions. - Keep hot water, cords, and operating appliances away from children.
- Place both appliances on a stable, dry, heat-resistant surface.
Shipping, Returns, and Customer Support
Review the
Talovira Shipping Policy
for information about order processing, delivery estimates, tracking,
address issues, and delayed packages.
Return eligibility, return instructions, damaged products, exchanges,
and refund processing are explained in the
Return and Refund Policy
.
Explore additional products through the
Coffee Maker Finder
,
browse current
Bundle & Save offers
,
or visit the
complete Talovira Shop
.
For questions about branding, included pieces, product dimensions,
compatibility, shipping, or returns, contact
Talovira Customer Support
before purchasing.
Build a More Consistent Home Coffee Routine
The Pour Over Coffee Bundle combines fresh grinding,
adjustable temperature, controlled pouring, and flexible grind
adjustment in one coordinated setup. It is a practical choice for home
coffee drinkers who want to experiment with brewing variables and
repeat the recipes they enjoy.
Review the product gallery, package contents, specifications, shipping
information, and return terms before adding the bundle to your cart.



Reviews
There are no reviews yet.